What issues should be noted during the operation of the tower kettle reboiler
Information summary：The tower kettle reboiler is the core heat exchange equipment used in distillation, chemical, pharmaceutical and other processes to achieve material vaporization and circulation separation. Its operating status directly determines the tower separation efficiency, product quality and production safety. During operation, it is necessary to adhere to the core principles of "safety first, stability an
The tower kettle reboiler is the core heat exchange equipment used in distillation, chemical, pharmaceutical and other processes to achieve material vaporization and circulation separation. Its operating status directly determines the tower separation efficiency, product quality and production safety. During operation, it is necessary to adhere to the core principles of "safety first, stability and controllability, anti scaling and leak prevention, energy conservation and high efficiency", strictly control key parameters such as liquid level, temperature, pressure, etc., standardize start stop operations, strengthen inspection and maintenance, eliminate abnormal situations such as overheating, overpressure, dry burning, leakage, etc., ensure long-term, stable, safe and efficient operation of equipment, and guarantee the continuous and stable production of the entire process system.
1、 Key points of liquid level control
The liquid level is the foundation for the safe operation of the tower kettle reboiler, and must be strictly controlled within the normal range specified in the process to prevent significant fluctuations. Specific precautions are as follows:
1. It is strictly prohibited to have a low liquid level: If the liquid level is below the specified lower limit, it will cause the reboiler tube bundle to be exposed to the gas phase, leading to dry burning, local overheating, and causing coking, corrosion, damage to the tube bundle, and even material decomposition and polymerization, causing safety hazards.
2. It is strictly prohibited to have a liquid level that is too high: if the liquid level is higher than the specified upper limit, it will reduce the gas phase space in the tower kettle, resulting in an increase in the amount of mist carried, affecting the distillation separation effect, and causing the product purity to be unqualified; At the same time, it may cause liquid to backflow into the shell side (or tube side) of the reboiler, disrupting heat exchange equilibrium and causing temperature and pressure fluctuations.
3. Stable liquid level fluctuation: Avoid frequent liquid level fluctuations to prevent mismatch between heating load and material evaporation, which can lead to uncontrolled temperature and pressure in the tower kettle and affect the stability of the entire process system; It is necessary to closely monitor the operation status of the liquid level gauge, conduct regular calibration, and ensure that the liquid level display is correct.
2、 Temperature and heating load control
The temperature and heating load directly affect the heat exchange efficiency and material separation effect of the reboiler, and the principle of "smooth rise and fall, not exceeding the limit" should be strictly followed. The specific precautions are as follows:
1. Strictly control the limit parameters: Strictly control the temperature and pressure of the heating medium (steam, thermal oil, hot water, etc.), as well as the temperature of the tower kettle materials, strictly prohibit overheating and overpressure operation, prevent equipment shells and tube bundles from being damaged due to overheating, and avoid material decomposition, coking, or explosion hazards.
2. Stable load adjustment: The heating load should be slowly increased or decreased, and it is strictly prohibited to increase or decrease the temperature or load sharply to prevent thermal shock from causing tube bundle expansion leakage, weld cracking, and extending the service life of the equipment.
3. Abnormal temperature handling: closely monitor the temperature of the tower kettle. If the temperature is abnormally high, it is often due to scaling or blockage of the tube bundle, or material retention, overheating, or coking. It is necessary to promptly investigate and handle it; If the temperature is too low, it is often due to insufficient supply of heating medium, insufficient heat exchange area, or poor circulation, which needs to be adjusted and supplemented in a timely manner.
4. Special material control: For materials that are prone to aggregation, decomposition, and coking, it is necessary to strictly control the wall temperature of the reboiler to avoid local overheating. If necessary, measures such as forced circulation and cooling protection should be taken to prevent material deterioration from causing malfunctions.
3、 Pressure and differential pressure monitoring
Pressure and pressure difference are key indicators reflecting the operating status of the reboiler, which need to be monitored in real time and any abnormalities should be promptly investigated. Specific precautions are as follows:
1. Strictly control system pressure: Real time monitoring of tower kettle pressure, reboiler shell side and tube side pressure to ensure that the pressure is within the process specified range, preventing equipment deformation, leakage, or safety valve tripping caused by overpressure, which affects production continuity.
2. Pay attention to changes in pressure difference: closely monitor the pressure difference at the inlet and outlet of the reboiler. If the pressure difference rises abnormally, it usually indicates that the tube bundle is scaled, blocked, or the gas phase channel is blocked, or the tower kettle liquid level is too high for backflow. It is necessary to stop the machine in a timely manner for cleaning and troubleshooting; If the pressure difference is too low, it is necessary to check the supply and circulation status of the heating medium to prevent a decrease in heat exchange efficiency.
3. Stable pressure difference fluctuation: Severe pressure difference fluctuations can lead to unstable operation of the distillation tower, causing problems such as product purity failure and tower pressure loss of control. It is necessary to promptly investigate the causes of fluctuations, adjust operating parameters, and ensure stable pressure difference.
4、 Prevent scaling, coking, and material deposition
Long term operation of the reboiler is prone to problems such as scaling, coking, and material deposition, which can affect heat transfer efficiency and equipment life. It is necessary to focus on prevention and treatment, and specific precautions are as follows:
1. Ensure reasonable circulation: For materials that are prone to scaling, it is necessary to ensure a reasonable circulation flow rate of the tower kettle materials to avoid prolonged retention in high-temperature areas and reduce the probability of scaling and coking.
2. Eliminate poor operation: Long term low flow and low liquid level operation is strictly prohibited to prevent overheating, decomposition, and coking of dead zone materials, and to avoid tube bundle blockage.
3. Regular inspection and cleaning: Regularly monitor the heat transfer coefficient of the reboiler. If the heat transfer efficiency continues to decrease, it indicates that scaling has occurred. Chemical or physical cleaning should be arranged in a timely manner to remove scaling and deposits on the surface of the tube bundle and restore heat transfer performance.
4. Special material protection: For solid materials and high viscosity materials, it is necessary to strengthen material pretreatment to prevent solid particles from entering the reboiler, while ensuring sufficient flushing flow rate to prevent particle deposition and pipe blockage.
5、 Leakage and sealing management
Leakage is a major safety hazard during the operation of the reboiler, and it is necessary to strengthen sealing inspections and promptly address leakage issues. Specific precautions are as follows:
1. Strengthen inspection and troubleshooting: During operation, focus on checking the sealing parts of the reboiler flange, expansion port, tube plate, head, valve, etc., observe for any medium leakage or dripping, and immediately reduce the load and stop the machine for handling if any leakage is found. It is strictly prohibited to operate with leakage.
2. Distinguish the hazards of leakage: Leakage on the heating steam side can cause water to enter the tower kettle, resulting in material carrying water, temperature fluctuations, and increased tower pressure, which affects product quality; Leakage from the process medium side can cause material loss and contamination of the heating system. If it is a flammable, explosive, or toxic medium, it can also lead to safety accidents such as fires, explosions, and poisoning.
3. Coping with thermal expansion and contraction: During the heating and cooling stages, the sealing surface of the equipment may become loose due to thermal expansion and contraction. It is necessary to focus on inspecting the sealing parts and promptly tighten the loose bolts to prevent leakage.
6、 Gas phase, liquid phase circulation and pulsation control
The normal operation of the reboiler relies on stable circulation of gas and liquid phases, and it is necessary to prevent abnormal situations such as poor circulation and pulsation. Specific precautions are as follows:
1. Ensure smooth circulation: Whether it is a natural circulation or forced circulation reboiler, it is necessary to ensure smooth material circulation. Poor circulation can lead to local overheating, decreased heat exchange efficiency, and even dry burning and coking.
2. Eliminate abnormal pulsation: Avoid phenomena such as water hammer, steam hammer, and periodic pulsation. Such abnormal vibrations can cause fatigue fracture of the tube bundle, loosening and leakage of the sealing surface. It is necessary to promptly investigate the circulation system and drainage system to eliminate pulsation hazards.
3. Stable forced circulation: The forced circulation reboiler needs to ensure a stable flow rate of the circulation pump to avoid low flow causing cavitation, flow interruption, and subsequent dry burning and equipment damage; Regularly check the operation status of the circulating pump and maintain it in a timely manner.
7、 Start stop operation specifications
Standardized start stop operation is the key to protecting the reboiler and avoiding equipment damage, and the following process must be strictly followed:
1. Driving operation: First establish the normal liquid level of the tower kettle, confirm that the circulation system is unobstructed, then slowly introduce the heating medium, gradually increase the heating load, and synchronously monitor parameters such as temperature, pressure, and liquid level. After the parameters stabilize, switch to normal operation.
2. Parking operation: First, cut off the heating source and stop the supply of heating medium. After the temperature and pressure of the tower kettle have dropped to a safe range, gradually lower the liquid level of the tower kettle. It is strictly prohibited to suddenly empty the tower kettle material under high temperature and high pressure to prevent equipment damage caused by excessive temperature difference.
3. Emergency parking: In the event of a sudden malfunction (such as leakage, overpressure, dry burning, etc.), the heating source must be quickly isolated, the entry and exit of materials must be cut off, emergency cooling and pressure reduction measures must be taken to prevent residual liquid from continuing to decompose and polymerize due to heat, causing safety accidents; At the same time, keep a good record of faults and promptly troubleshoot and handle them.
8、 Safety and Environmental Management
Adhere to the principle of safety first and environmental compliance standards, and implement various safety and environmental protection measures. Specific precautions are as follows:
1. Strengthen safety protection: Overheating and overpressure operation are strictly prohibited in the reboiler area. If flammable, explosive, toxic, or corrosive media are involved, complete interlocking protection devices and alarm devices must be installed to ensure timely shutdown and alarm in case of abnormalities.
2. Smooth drainage system: The drainage system of the steam reboiler needs to be kept smooth. Poor drainage can lead to water hammer, decreased heat transfer efficiency, and even damage to equipment. Regular inspections of the drainage valves and condensate pipelines are necessary to promptly clean up blockages.
3. Verification of safety accessories: Regularly verify the safety accessories such as safety valves, pressure gauges, thermometers, etc. that are matched with the reboiler to ensure their sensitivity and reliability, and to effectively play a role in safety protection, preventing safety accidents caused by accessory failure.
4. Standardize maintenance and environmental protection: During the cleaning and maintenance of the reboiler, residual materials inside the equipment must be replaced, steamed, and purged to prevent spontaneous combustion, poisoning, or corrosion of the equipment; Wastewater and waste materials from cleaning must be treated in accordance with environmental regulations, and it is strictly prohibited to discharge them indiscriminately.
Service Hotline
Hotline：0512-52093708
E-mail：yutezjl@163.com
Address：No. 101, Taojia Bridge, Dahe Village, Shanghu Town, Changshu City, Suzhou City, Jiangsu Province
Add wechat
Contact us
Telephone